Need Help!
#1
Full Member
Thread Starter
Join Date: Feb 2002
Location: mass
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Need Help!
I was just tinkerin with my turbo 2...i pulled of the TID to check out the turbo, I also took off the intercooler hose to check for oil. Put everything back on right and my car wouldnt start. It got flooded. So I got it runnin but now has like no power, revs extremely slow, hard to start, and when i gas it it backfires. SOMEBODY HELP ME!
Matt
Matt
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Could be a lot of things. Check:
-plug at air flow meter
-any missing vacuum hoses
-TPS unplugged?
-vacuum leaks
More than likely, there is an air leak somewhere around the TID. They have been known to crack when disturbed.
-plug at air flow meter
-any missing vacuum hoses
-TPS unplugged?
-vacuum leaks
More than likely, there is an air leak somewhere around the TID. They have been known to crack when disturbed.
#3
Full Member
Thread Starter
Join Date: Feb 2002
Location: mass
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
I checked the TID and its fine, its stil flexible, what else could I have knocked off? All I took off was the TID and the hose that goes from the turbo to the IC
#4
Lives on the Forum
There's a 5/8"ID hose that runs from the splitter pipe right after the turbo compressor into the BAC valve - check that to make sure it's not leaking.  This hose isn't clamped from the factory, so it's a good idea to clamp it if it isn't already!
-Ted
-Ted