need help
#1
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Orlando
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
need help
im doing a six port swap on my tII. will be porting my lim. using a oil pedistal for my feed and stock return off of my front cover. and my bac for supply and return on coolant. if anybody has any helpful comments or suggestions about the supply and return lines for the turbo let me know.
my question is: the place for the knock sensor on the six port iron. whats the easiest way to install the tII sensor? im using my tII ecu and need the sensor. also does it just screw out? thanx
my question is: the place for the knock sensor on the six port iron. whats the easiest way to install the tII sensor? im using my tII ecu and need the sensor. also does it just screw out? thanx
#2
Senior Member
Thread Starter
Join Date: Feb 2005
Location: Orlando
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
just got done talking to mazdatrix and they sed that the 87 and 88 tII's didnt come with knock sensors. i thought all the tII's came with knock sensors and couldnt operate functionally with a stock ecu, can any body can elaborate for me? thanx