2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Need everyone's advice for this

Old Nov 10, 2010 | 10:18 PM
  #51  
devilxavierz's Avatar
Thread Starter
Banned. I got OWNED!!!
iTrader: (10)
 
Joined: Sep 2010
Posts: 338
Likes: 0
From: Irving TX
Originally Posted by EnjoiPugs
Sorry man, like I said I was in a similar position about 2 years back. It's a really crappy position to be in. I know you're taking it seriously, how couldn't you. Best of luck to getting it figured out.
yeah man, im being very serious so i hope you guys take me seriously too. Thanks for the good luck
Reply
Old Nov 10, 2010 | 10:26 PM
  #52  
devilxavierz's Avatar
Thread Starter
Banned. I got OWNED!!!
iTrader: (10)
 
Joined: Sep 2010
Posts: 338
Likes: 0
From: Irving TX
Sometimes when I think about the headlight, I am not 100% sure if i really blown it because I remember that night when I turned on the light, it went off all of a sudden by itself. I am sure it's not the connection. How do I know if I blew the fuse or headlight switch?? Where can I get a replacement? Sorry for all these questions but thanks

Last edited by devilxavierz; Nov 10, 2010 at 10:32 PM.
Reply
Old Nov 10, 2010 | 11:49 PM
  #53  
texFCturboII's Avatar
version 2.0
Tenured Member 15 Years
iTrader: (17)
 
Joined: Mar 2007
Posts: 3,596
Likes: 2
From: Fort Worth, TX
Originally Posted by Rob XX 7
I blew 2 low beam lights at the same time by trying to jump start a really dead battery, AND I blew the main fuse!

Who would have thought?
Hahaha.... I did the EXACT same thing today!
Reply
Old Nov 11, 2010 | 12:03 AM
  #54  
devilxavierz's Avatar
Thread Starter
Banned. I got OWNED!!!
iTrader: (10)
 
Joined: Sep 2010
Posts: 338
Likes: 0
From: Irving TX
Originally Posted by texFCturboII
Hahaha.... I did the EXACT same thing today!
how do i know if the fuse is blown? If that's the case, where can I get a replacement?
Reply
Old Nov 11, 2010 | 06:01 AM
  #55  
Rob XX 7's Avatar
FC guy
Tenured Member 20 Years
iTrader: (8)
 
Joined: Oct 2002
Posts: 8,713
Likes: 17
From: Long Island, New York
try the highbeams and see if the lights come on, remove the fuse cover under the hood, if its still there, and inspect the fuses. There will be a break and possibly some charring in the middle

headlights you buy at any auto parts store, the entire headlight gets replaced, usually under $20, may want to look into a headlight conversion if you will be replacing anyhow
Reply
Old Nov 11, 2010 | 09:47 AM
  #56  
redlineracer's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Feb 2003
Posts: 541
Likes: 0
From: Covington, VA
Originally Posted by devilxavierz
how do i know if the fuse is blown? If that's the case, where can I get a replacement?
If you're not sure take it to someone.
Where in south jersey are you? There are a few Rotary Mechanics out there. (http://jprimports.com/) JPR is the best, I believe he is located in Blackwood. Chiki is in Camden he did a lot of work for me. I'll see if I can find his number.
Reply
Old Nov 11, 2010 | 11:02 AM
  #57  
devilxavierz's Avatar
Thread Starter
Banned. I got OWNED!!!
iTrader: (10)
 
Joined: Sep 2010
Posts: 338
Likes: 0
From: Irving TX
Originally Posted by Rob XX 7
try the highbeams and see if the lights come on, remove the fuse cover under the hood, if its still there, and inspect the fuses. There will be a break and possibly some charring in the middle

headlights you buy at any auto parts store, the entire headlight gets replaced, usually under $20, may want to look into a headlight conversion if you will be replacing anyhow
Thank you so much!!! You are a really nice guy!!!
Reply
Old Nov 11, 2010 | 11:08 AM
  #58  
devilxavierz's Avatar
Thread Starter
Banned. I got OWNED!!!
iTrader: (10)
 
Joined: Sep 2010
Posts: 338
Likes: 0
From: Irving TX
Originally Posted by redlineracer
If you're not sure take it to someone.
Where in south jersey are you? There are a few Rotary Mechanics out there. (http://jprimports.com/) JPR is the best, I believe he is located in Blackwood. Chiki is in Camden he did a lot of work for me. I'll see if I can find his number.
Hey, thank you too man!! That info is really helpful. Thank you very much. I really appreciate.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Andrew7dg
1st Generation Specific (1979-1985)
3
Aug 6, 2017 01:41 PM
eddierotary
Engine Management Forum
16
Oct 4, 2016 08:22 PM
Zinraf
2nd Generation Specific (1986-1992)
3
Oct 1, 2015 01:09 PM
izzolaw
1st Gen General Discussion
2
Sep 27, 2015 08:33 PM
risingsunroof82
1st Generation Specific (1979-1985)
8
Sep 7, 2015 01:11 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:24 PM.