I have a rb turbo back and a hks intake.

boost is upped to about 9 psi and i have a fcd installed.

i need to replace my primary injectors and i would like to replace them with oe spec equivalent ones, but not for $200 an injector.

can someone direct me to aftermarket injectors, or somewhere i can get oe equivalent injectors that would handle a stock motor with just intake and exhaust and fcd upgraded?

thanks.

the car is a s4, with jdm s4 engine. car is a turbo 2.

 

injector.com

 

they dont sell any for the fc bud.

 

Glad to see you looked, goto performance injectors

 

rceng.com

 

they dont need to really be FC specific. the fc uses pretty standard injectors, and most others will work.

 

I'm pretty much looking for a drop in option, i dont want to splice anything. Or perhaps buy an injector with a wiring harness i could buy as well for an adapter.

can anyone actually give me a specific link to replacement ones (not necessarily OE, but ones i could drop in without hassle with anything else) I could just click and buy?

 

S4 FC's use a generic Bosch EV1 connection. Almost any aftermarket Bosch style injector will plug in. You do need to know whether you have a high or low impedance setup as it is though.

Why not just send in your injectors for cleaning @ $20 each?

 

i thought previous owner had them cleaned, or maybe just flow tested. i am having a frequent flooding problem and loss in power under 3500 rpms and it seems to be the primary fuel injectors. I was also told to check the ground connections, but the primaries work fine when it is started cold, hesitation only occurs after driving it a few places (engine is on and off)

 

or running higher boost will not hurt to run a set of gsl-se 680cc. Or buy an Rtek 1.7 and run 750 secondarys. Great upgrade.

 

can you link me ?

 

www.pocketlogger.com