They must be but when I go on Mazdatrix it just lists one for all 2nd gens and it looks the same as the one I got used. The one I got used from ebay is diffrent then the one that came off my TII it is a diffrent size and the part that mounts onto the firewall is in a diffrent position. Mine is slightly slanted while the used one I got sticks stright up vertically.

 

they master cylinders are the same, though they may be different brands, as long as they have the same size plug, it's the slave cylinders you have to watch out for!

 

look how differnent they look. if i put the other one in it the resovoir would be slanted.

[IMG]C:\Documents and Settings\Tom\Desktop\DCIM\misc\Picture 007small.jpg[/IMG]
[IMG]C:\Documents and Settings\Tom\Desktop\DCIM\misc\Picture 008small.jpg[/IMG]
[IMG]C:\Documents and Settings\Tom\Desktop\DCIM\misc\Picture 009small.jpg[/IMG]

 

none of the pictures work, because you linked them to your hard drive Unless they sent you one for the wrong type (ie FB or FD) then it should work.

 

does this attachment work?

 

Yes, it does. That's unusually strange. Does the metal mounting bracket turn at all, or can it be turned? Perhaps it got bumped against something and twisted? That's definatly not how it should be, though they look identical except for that! See if you can straigten it out somehow.

 

Do you mean the mounting bracket under the dash? heres what the mounting holes look like.

[IMG]C:\Documents and Settings\Tom\Desktop\DCIM\misc\Picture 009small.jpg[/IMG]

 

[IMG]C:\Documents and Settings\Tom\Desktop\DCIM\misc\Picture 008small.jpg[/IMG]

another pic of the two.

 

This is quite unusual. I wonder if they are different from series 4 to 5? Because I'm almost positive mine was straight up and down. I'm clueless, I don't know what to say.

 

I think that ones for an FB

 

na is shorter in length

 

you said the one you got used is straight up ..so then whats the problem just put that on since it wont be slanted, or am i reading wrong??