N/A to TII swap: Speedo not on cue.
09-08-07, 07:05 PM
#1
Rotary Enthusiast
Thread Starter
iTrader: (1)
Join Date: Aug 2005
Location: Canada
Posts: 1,315
Likes: 0
Received 0 Likes
on
0 Posts
N/A to TII swap: Speedo not on cue.
So I made a TII swap into my NA 88. I have 16" Konig wheels and OEM size tires like the TII and I'm pretty sure my speedo is off. It shows about 130km/h when I'm actually going 120km/h. I have the GXL LSD, is that why? And to fix this, should I get bigger tires? Right now I have 205/55/R16. So should I go 215/55/R16? Or 205/60/R16?
Thank you.
Thank you.
09-09-07, 03:45 AM
#4
N/A 150
T II 160
is the wheel/tire combo the same size for n/a and tII?
http://www.fc3spro.com/TECH/MODS/RT/tires.htm
T II 160
is the wheel/tire combo the same size for n/a and tII?
http://www.fc3spro.com/TECH/MODS/RT/tires.htm
Last edited by sharingan 19; 09-09-07 at 04:01 AM.
09-09-07, 03:57 AM
#5
Leah Dizon > Roast Beef
iTrader: (1)
Join Date: Feb 2007
Location: Québec
Posts: 1,006
Likes: 0
Received 0 Likes
on
0 Posts
N/A's have 15in. wheels therefore if you did not swap the clusters you wont have a accurate reading.
edit: and as far as I know all north-american clusters go up to 260.
edit: and as far as I know all north-american clusters go up to 260.
Trending Topics
09-10-07, 01:34 PM
#8
pwned
Join Date: Sep 2005
Location: Northern Indiana
Posts: 1,296
Likes: 0
Received 0 Likes
on
0 Posts
hmm.. im having this same problem , but there was no swaping on my part...
but from o-20 mph, the needle is really shaky, then smoothes out after 20.... my speedo calbe clicks also.... cant figure this one out..
but from o-20 mph, the needle is really shaky, then smoothes out after 20.... my speedo calbe clicks also.... cant figure this one out..
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM
