2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

N/A to TII questions

Thread Tools
 
Search this Thread
 
Old Aug 8, 2007 | 08:37 PM
  #1  
lilredbeast's Avatar
Thread Starter
Newbie
 
Joined: Jul 2007
Posts: 3
Likes: 0
From: NM
N/A to TII questions

hey guys i am getting into RX-7's and i am going to be buying a 1987 GTU RX-7 N/A obviously i would like to have it turbo so my question is, can i just put a turbo kit on to it, is there such a kit? Next question is if i can not simply bolt up a turbo kit i would buy a T2 motor so would i need to swap out the tranny and rear diff or just the tranny. please let me know i searched around a lil but i didnt see any info so any input is appreciated. Thanks
Reply
Old Aug 8, 2007 | 08:43 PM
  #2  
chiefnobum's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Jun 2003
Posts: 434
Likes: 5
From: Regina, SK
Hey, here's an excerpt from the FAQ:

Can I swap a Turbo engine/Jspec engine/13BT/etc into my Non Turbo?
Yes, check these links:
https://www.rx7club.com/forum/showthr...threadid=26647
http://www.rotaryresurrection.com/ro...conversion.htm


What Turbo kits can I add onto my non turbo RX-7?
There are no longer kits formally made at the time of this post, however there are companies from time to time that do make available non turbo to Turbo Kits. Because most of these companies stop building the kits, or go out of business in short time, it is impossible to keep active links for them.

Most people that turbo a non turbo make their own kits:
Using the stock TII turbo, exhaust manifold with spacer, NA intakes and NA ECU:
http://www.aaroncake.net/rx-7/naturbo.htm
https://www.rx7club.com/forum/showthr...threadid=88540

https://www.rx7club.com/forum/showthr...threadid=88758
https://www.rx7club.com/forum/showthr...hreadid=124232
http://users2.ev1.net/~ccoutts/turbo..._a_project.htm

Using the stock TII turbo, exhaust manifold, intakes, ECU:
http://forum.teamfc3s.org/showthread.php?t=37694

Turbo-NA Forum:
http://www.aaroncake.net/forum/forum...urbocharged+NA


Hope that helps!
Reply
Old Aug 8, 2007 | 09:06 PM
  #3  
smokie's Avatar
garageRE
Tenured Member 15 Years
iTrader: (5)
 
Joined: Jun 2006
Posts: 1,041
Likes: 0
From: Compton
for the turbo kit you might as well get a turbo II engine as far as the swap what you would need to do (i just finished mines) you will need a boost map sensor a t2 wire harness and ecu.....as far as the tranny and rear end you will need to get a t2 tranny (there are places that sell the engine and tranny for cheap) the rear end how ever you dont have to change it mazdatrix sale a t2 conversion drive shaft but i do recomend if you are going to drift are do any racing on the track then upgrade that to the t2 rear end if your just going to dd it then you dont have to change it as of now it wont hurt your car but if you want to do it you can i know some people if you need help getting the things that you need
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
barkz
Power FC Forum
37
Nov 21, 2020 09:34 AM
sctRota
Old School and Other Rotary
7
Nov 10, 2015 12:57 PM
TwentyDW
2nd Generation Specific (1986-1992)
4
Sep 2, 2015 06:42 PM




All times are GMT -5. The time now is 07:42 PM.