barakelium

hey guys. i recently rebuilt my 89 na. i streetported it and did a bunch of other things to it. after asking around, i found out that i had to bump up my idle to get the car running, and was told to turn the phillips screw on the throttle body. unfortunately i ended up turning the wrong screws for a while before realizing the throttle adjusting screw was underneath the backside of the throttle body. i finally got the car running, and have accumulated approx. 1800 miles. the only problem is that it has a hard time idling, and i have the idle set to around 3k. i was wondering if anyone knew the stock setting for how many turns out the screws i messed w/ were. i would hate to have to buy a used throttle body just to get it to run right lol. thanks.

p.s. i messed w/ 3 screws, one was the idle, the other 2 are the ones i messed up. i believe that both of them can be adjusted w/o removing the throttle body.