2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

n/a 88 sutters after 3800 rpm

Thread Tools
 
Search this Thread
 
Old 03-17-07, 10:26 PM
  #51  
I'm a boost creep...

 
NZConvertible's Avatar
 
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes on 8 Posts
Stop being a cry baby. You can't expect to give out incorrect info and not be called on it.
Old 03-18-07, 01:29 AM
  #52  
Full Member
Thread Starter
 
gotgrip666's Avatar
 
Join Date: Mar 2007
Location: middletown , ny
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
well NZ iis it at all possible my intake could cause my problems,because the stock airbox was loose only one bolt holding it in. the others were stripped, so i just took the top of it off yesterday and taped down the filter<<<<<<getto lol,



on another note, how many niles ie vaccum plugs are there on the engine for the air condioning and heating system because on the very bottom left side of the engine closest to the fire wall there is a nipple with a vaccum line on it but the line is cut at the niplple, is that anything important
Old 03-18-07, 01:54 AM
  #53  
Rx7
 
fredster102's Avatar
 
Join Date: Dec 2006
Location: Canada
Posts: 220
Likes: 0
Received 0 Likes on 0 Posts
you mean the two metal ones that sit one above and one below the other?
Old 03-18-07, 03:54 AM
  #54  
I'm a boost creep...

 
NZConvertible's Avatar
 
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes on 8 Posts
Originally Posted by gotgrip666
well NZ iis it at all possible my intake could cause my problems,because the stock airbox was loose only one bolt holding it in. the others were stripped, so i just took the top of it off yesterday and taped down the filter
That won't have any effect other than raising the intake temp very slightly. Only leaks after the AFM cause problems.

on another note, how many niles ie vaccum plugs are there on the engine for the air condioning and heating system because on the very bottom left side of the engine closest to the fire wall there is a nipple with a vaccum line on it but the line is cut at the niplple, is that anything important
I have no idea what you're referring to. Photo?
Old 03-18-07, 05:55 PM
  #55  
Full Member
Thread Starter
 
gotgrip666's Avatar
 
Join Date: Mar 2007
Location: middletown , ny
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
im going to my garage tommorow i will take pics and the post them, andd tere are also these switches on the pasenger side of the motor on the blockone in the front and one in the back, im not sure wich way they are supposed to go
Old 03-19-07, 03:05 PM
  #56  
Rx7
 
fredster102's Avatar
 
Join Date: Dec 2006
Location: Canada
Posts: 220
Likes: 0
Received 0 Likes on 0 Posts
is this what you are talking about

http://img114.imageshack.us/img114/8475/182ab9.jpg
Old 03-19-07, 05:16 PM
  #57  
Full Member
Thread Starter
 
gotgrip666's Avatar
 
Join Date: Mar 2007
Location: middletown , ny
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
VERY VERY ODD, i went to my garage today and brought the rx7out for a ride and the sputtering problen is completly gone for some reason all thoughafter a while of driving i started getting a really bad fuel cut when i would try and floor it, can anyone maybe elaberate on this for me
Old 03-19-07, 10:50 PM
  #58  
Full Member
Thread Starter
 
gotgrip666's Avatar
 
Join Date: Mar 2007
Location: middletown , ny
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
anyone?
Old 03-20-07, 12:55 PM
  #59  
Rotary Power

iTrader: (15)
 
wthdidusay82's Avatar
 
Join Date: Sep 2004
Location: Dinwiddie, Va
Posts: 3,706
Received 4 Likes on 4 Posts
Originally Posted by gotgrip666
anyone?
Could be some kind of intermittant connection that works for a while then stops working , then works again.

My rx7 did this same thing before when I first got the motor started after rebuild, and the problem somehow fixed itself. It was actually a worse problem than yours though, the car would drive fine then all of a sudden not let you rev past 1500 rpm , making it nearly impossible to drive on the street, good thing I never drove far before it was fixed.
Old 03-21-07, 11:50 AM
  #60  
Rx7
 
fredster102's Avatar
 
Join Date: Dec 2006
Location: Canada
Posts: 220
Likes: 0
Received 0 Likes on 0 Posts
i was talking to my dad who knows alot about electronis he told me this can be fixed by regrounding the negative injector wire?
Old 03-21-07, 04:57 PM
  #61  
Full Member
Thread Starter
 
gotgrip666's Avatar
 
Join Date: Mar 2007
Location: middletown , ny
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts
well i drove my car around all day yesterday and didnt cut out at all, it seems to be running real strong, im gonna give it a full tune up next week and put a cone filter on it
Old 03-22-07, 01:23 AM
  #62  
I'm a boost creep...

 
NZConvertible's Avatar
 
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes on 8 Posts
Originally Posted by fredster102
i was talking to my dad who knows alot about electronis he told me this can be fixed by regrounding the negative injector wire?
No offence to your Dad but he doesn't seem to know much about EFI. The injectors receive 12V from the main relay and a switched ground from the ECU. There is nothing to reground, and messing with any of the injector wires will cause nothing but trouble.
Old 03-24-07, 02:00 PM
  #63  
Rx7
 
fredster102's Avatar
 
Join Date: Dec 2006
Location: Canada
Posts: 220
Likes: 0
Received 0 Likes on 0 Posts
No offence to your Dad but he doesn't seem to know much about EFI. The injectors receive 12V from the main relay and a switched ground from the ECU. There is nothing to reground, and messing with any of the injector wires will cause nothing but trouble.
yeah i didnt think that was possible iether hes more into electronics then cars so that was just his guess , how long does it usually say it takes to reground the ECU, im probably gonna do that in the next few days

well i drove my car around all day yesterday and didnt cut out at all, it seems to be running real strong, im gonna give it a full tune up next week and put a cone filter on it
do you have any idea what you did to fix your problem , this sucks mine still does it
Old 03-24-07, 05:48 PM
  #64  
I'm a boost creep...

 
NZConvertible's Avatar
 
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes on 8 Posts
Originally Posted by fredster102
how long does it usually say it takes to reground the ECU, im probably gonna do that in the next few days
Before you touch anything, read this:

http://aaroncake.net/RX-7/grounding.htm
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vish86
2nd Generation Specific (1986-1992)
12
10-01-15 10:04 AM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
The1Sun
New Member RX-7 Technical
5
09-15-15 04:45 PM
mulcryant
2nd Generation Specific (1986-1992)
10
09-09-15 05:24 PM



Quick Reply: n/a 88 sutters after 3800 rpm



All times are GMT -5. The time now is 09:52 AM.