My s4 na rebuild - what else should I add to my list of parts to get ?
#1
My s4 na rebuild - what else should I add to my list of parts to get ?
Ok im getting my engine rebuilt by rotary resurrection, getting it streetported. Mods im doing are the following - dual friction centerforce clutch, lightweight flywheel (throwout bearing, pilot bearing/seal), full header back exhaust ,new motor mounts/tranny mount, new fuel filter, new water pump, new thermostat, and obviously all new gaskets and hoses.
Is there anything else im missing that i should replace while its all apart ?
Is there anything else im missing that i should replace while its all apart ?
Last edited by wthdidusay82; 03-14-05 at 05:28 PM.
#2
Rotary Enthusiast
iTrader: (25)
Join Date: Sep 2003
Location: Melbourne, FL
Posts: 1,440
Likes: 0
Received 0 Likes
on
0 Posts
remember to replace the tranny gasket. is right underneath the tranny fork it looks like an 8. IF YOU FORGET TO REPLACE IT!! it might leak and say byebye to clutch and flywheel. Make sure u get a good throw out bearing IS A MUST. what else... double check ur differential mounts. I knwo they expensive but better than breaking off especially if u are looking for serious hp. Im sure im forgetting some stuff... take care good luck
#3
Originally Posted by Peruvianrx7
remember to replace the tranny gasket. is right underneath the tranny fork it looks like an 8. IF YOU FORGET TO REPLACE IT!! it might leak and say byebye to clutch and flywheel. Make sure u get a good throw out bearing IS A MUST. what else... double check ur differential mounts. I knwo they expensive but better than breaking off especially if u are looking for serious hp. Im sure im forgetting some stuff... take care good luck
u mean the transmission main seals right ? i havent checked the differential mount yet but i guess i can...i mean the car only has 113k miles on it but u never know...i didnt think they were prone to busting and ******* up ur car ?
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
08-13-15 04:55 AM