Ok so I'm ready to drop in my rew in my fc but just realised my microtech is wired for a t2 cas and the rew dosent have that . Thought about swaping front cover but rew oil pan is a lil longer . So any ideas on what to do would be apreciated

 

Sheesh no one?

 

Rewire the CAS? It's only 4 wires
edit
meaning rewire the microtech to the REW trigger wheel thingy.

 

I asked a similar Q and got the same answer. I'm just going to cut a CAS plug off and use that to wire up the FD.

 

Dont rewire anything it wont work,REW and T2 CAS,COILS,HALL SENSOR are not the same.Use the T2 front cover,cas and stock coils(if is not setup for aftermarket coils)

Oil pan has to be custom(modified)or you can try a baffle plate and hope for the best.

 

Yea I already know rewirein it won't work u have to send the ecu back to microtech. Ill just modify the pan