my precaution on replacing primary injectors
05-18-05, 11:08 AM
#1
I like you. I like sex.
Thread Starter
my precaution on replacing primary injectors
hey guys im just curious about this before i start getting into this more. im gonna replace the primary fuel injectors on my daily driver because who knows how long its been since the last time and because i just wanna do something that would help me learn more about the car.
what i wanted to know is how long this would normally take for a noob with a haynes manual(ive replaced the secondaries before though) and if theres anything else i should know before getting into this.
thanks guys.
what i wanted to know is how long this would normally take for a noob with a haynes manual(ive replaced the secondaries before though) and if theres anything else i should know before getting into this.
thanks guys.
Last edited by ramtookrazy; 05-18-05 at 11:10 AM.
05-18-05, 11:42 AM
#2
Senior Member
Join Date: Apr 2003
Location: Windsor Ontario Canada
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
put out your cigarette
idle car and unplug fuel pump so there is no pressure in the system.
check out FSM at iluvmyrx7.com, go slow, new o-rings, grommets, alot half a day
replace pulsation dampner (#1 cause of engine fires), fuel lines,
may as well have all 4 injectors cleaned if your in there.
idle car and unplug fuel pump so there is no pressure in the system.
check out FSM at iluvmyrx7.com, go slow, new o-rings, grommets, alot half a day
replace pulsation dampner (#1 cause of engine fires), fuel lines,
may as well have all 4 injectors cleaned if your in there.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
