With my Mods do I need a boost controler or upgraded BOV?
#3
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
A boost controller is used to raise max boost. An electronic one also increases the speed at which boost rises, so even if you leave your boost level the same, you’ll see an improvement in mid-range torque because max boost is reached earlier.
Your stock BOV is fine unless you’re running over about 13psi boost or you want to make some noise.
Your stock BOV is fine unless you’re running over about 13psi boost or you want to make some noise.
#4
Senior Member
If you want to go faster then you need a boost controller. This will allow you to change when the wastegate opens thereby giving you higher output from the turbo.
If you want to protect that turbo from compressor surge then you need a BOV
If you want to protect that turbo from compressor surge then you need a BOV
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
stickmantijuana
MoTeC
5
09-10-15 07:58 PM