2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

my 7 wont start????

Thread Tools
 
Search this Thread
 
Old Nov 26, 2005 | 07:08 PM
  #1  
DVLFC7's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Feb 2005
Posts: 6
Likes: 0
From: Melbourne, Australia
my 7 wont start????

Ey everybody.. my 7 decided to stop startin one day... its got plently compression and more than enough fuel.. now ive pulled the leads out and tested for spark and found that it wasnt sparking.. i tried a mates coil + igniter pack and it made 1 spark b4 dying in the ***.. ive tested the voltage gettin to the igniter and it seems to b a lil low... 1.32volts. im sure its meant to b aorund the 12v area..
its runnin a HKS Fcon pro V ECU.. any ideas?
Reply
Old Nov 26, 2005 | 07:33 PM
  #2  
Kory_yahi's Avatar
Look ma'! I am spoolin'!
Tenured Member 05 Years
 
Joined: Nov 2004
Posts: 747
Likes: 0
From: california, San Luis Obispo
maybe your ecu went bye bye!?
Reply
Old Nov 27, 2005 | 01:16 AM
  #3  
FB II's Avatar
Banned. I got OWNED!!!
 
Joined: Dec 2002
Posts: 4,192
Likes: 0
From: wishing i was back in FL
suggestion: put a holley on it
Reply
Old Nov 27, 2005 | 03:40 PM
  #4  
GTR's Avatar
GTR
Senior Member
Tenured Member 20 Years
iTrader: (6)
 
Joined: Mar 2001
Posts: 444
Likes: 0
From: San Jose, CA
You didnt list your year so Ill just assume its an 87-88. Check the (Black/Yellow) terminal if it has 12V first. If it doesnt not, check wiring diagrams and see where that wire leds to. Report back with results.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
whinin
New Member RX-7 Technical
10
Sep 5, 2015 11:52 PM




All times are GMT -5. The time now is 12:58 AM.