msd?
#1
Junior Member
Thread Starter
Join Date: Sep 2005
Location: plant city
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
msd?
ok i got a msd sci box (recomended by msd) and it has no installation guide for a rotory motor so i was wondering how i should hook it up?my car is a 1988 n/a
#2
Rotary Enthusiast
i dont know how to hook it up but you really dont need an type of ignition up grade unless you need to replace something because the stock ignition system is just fine with or with out mods all of the fastest fc's ive seen still run stock ignition systems.
Search google im sure there will be a diagram or some type of write up but if you got it strait from msd then call them and ask for instructions.
Search google im sure there will be a diagram or some type of write up but if you got it strait from msd then call them and ask for instructions.
Last edited by rx7b13; 01-15-06 at 02:08 AM.
#3
I am 2Furious
Join Date: Sep 2004
Location: NJ / Philly
Posts: 846
Likes: 0
Received 0 Likes
on
0 Posts
all instructions/manuals are on their website (www.msdignition.com)
#4
King of the Loop
Originally Posted by rx7b13
i dont know how to hook it up but you really dont need an type of ignition up grade unless you need to replace something because the stock ignition system is just fine with or with out mods all of the fastest fc'sive seen still run stock ignition systems
As for the install check this out:
http://www.fc3spro.com/TECH/HOWTO/CDI/cdi.html
#5
Rotary Enthusiast
Originally Posted by BklynRX7
Im not saying your wrong, but PLENTY opf people here use cdi boxes.
Last edited by rx7b13; 01-15-06 at 02:14 AM.
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM