motor stand
11-14-02, 11:18 AM
#1
Senior Member
Thread Starter
Join Date: Jul 2002
Location: GA
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
motor stand
I finally got my motor out and I need to put it on the engine stand I just bought, how do you put a rotary on a motor stand. I dont want to put it on the stand and it fall. Please help
11-14-02, 12:09 PM
#3
We come with the Hardcore
iTrader: (2)
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,456
Likes: 0
Received 0 Likes
on
0 Posts
...
If it's a "standard" engine stand, and you are only putting it on to bolt on things like the LIM & UIM, then you can turn it sideways, and bolt it onto the drivers side of the front housing. All you need is at least 3 bolts (or 2 nuts and a bolt) and it'll stay planted. HOWEVER, it's difficult to spin the engine. (But if you're just bolting on the upper-end, you have no problems)
So, you MIGHT need an adapter... but because you bought a motor... probably not.
So, you MIGHT need an adapter... but because you bought a motor... probably not.
Thread
Thread Starter
Forum
Replies
Last Post