motor mounts, which ones
Thread Starter
Full Member
Joined: Oct 2004
Posts: 180
Likes: 0
From: Columbus OH
motor mounts, which ones
so upon intsalling my motor mounts i realized the bolt going through the mounts is offset. i had two mounts, i believe one from a tII and one from a NA. They should be the same correct? One is smaller but i figured it needed to go on the steering side. Is there a wrong mount because my tranny seems crooked but i had no time to figure it out. I know the weld sets the postion of the mount.
Thread Starter
Full Member
Joined: Oct 2004
Posts: 180
Likes: 0
From: Columbus OH
no one has seen what TII-NA motor mounts look like? my steering side one is smaller with no holes through the metal part. My right side is a larger mount with three holes in it. Does this work? I do not know if the mounts are different between the TII and NA
as far as I know they mounts are the same. I had a bad one on my 88 TII on the pass. side, and swapped it with one from the pass. side of a S5 N/A motor. The one on the pass. side has like a metal hat to it, roundish shaped...
