can i use a mc thats for non aas if i took my aas out i know some of you guys are going to say search but i'm in a hurry cause i need to order it in a lil while so it can be here tomorrow thanks

 

Why not just get the one you are supposed to get?

http://www.nopionline.com/nopistore/...A%20RX7%201987

Unless you dont have ABS..then this one:

http://www.nopionline.com/nopistore/...A%20RX7%201987

But I would assume if you are removing all the AAS equipment, then you could just get the standard one:

http://www.nopionline.com/nopistore/...A%20RX7%201987

 

No, the break lines do not match.
IIRC, the non AAS has 4 lines and the AAS has 2 lines...but i could have that mixed up.

 

i'm bout to remove the aas thats why iwas asking cause i need a new master cylinder right now and i saw that the prices change when you dont have abs and aas . one last thing what is the sensor at the bottom of the mc for? not the one on the reservor but at the very bottom thanks again

 

and i dont have abs just have aas thats bout to be removed