manual windows to power windows?
#1
Full Member
Thread Starter
Join Date: Aug 2010
Location: tacoma
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
manual windows to power windows?
I have manual windows and im buying interior from someone in wa and he has power windows. So i thought I'd switch to power windows now so what all do i need ?thanks
#5
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
I hate them too. They make sense in a big car where you can't reach the passenger side crank from the driver's seat, but that isn't an issue in an RX-7. I am considering changing my convertible over to manual windows because the power windows have died for the second time now and I am getting tired of wasting my time on this.
#7
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
Don't forget the interior door panels as well, unless you want to put up with the hole left by the crank.
If you don't use the factory switches (and I recommend not doing so because they are very unreliable) you can find a nice set of toggle switches and wire them in yourself. Most of the hot rod companies sell these switches. Then you can place them anywhere you want. I have mine right in front of the shifter on the center console so they are easy to reach.
If you don't use the factory switches (and I recommend not doing so because they are very unreliable) you can find a nice set of toggle switches and wire them in yourself. Most of the hot rod companies sell these switches. Then you can place them anywhere you want. I have mine right in front of the shifter on the center console so they are easy to reach.
Trending Topics
#8
T2 Duo!
iTrader: (6)
Sunroof died while open and raining.
Ground issue where I had to bump start the car. When I got to work in new haven and shut the car off, passenger window was down. Cant put it up without the car running. Ground was flat. Had to drag friends away from work to help bump start it again to put the window down.
I'm all set with power stuff.
#11
Full Member
Thread Starter
Join Date: Aug 2010
Location: tacoma
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Where do i hook the wires up to? i have my door panels off i want to hook these up soo my windows work i dont want to have power windows that arent hooked up thanks
Thread
Thread Starter
Forum
Replies
Last Post