Manual seat belt question?
#1
Senior Member
Thread Starter
Join Date: Apr 2001
Location: BossTown, MA
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
Manual seat belt question?
I have a 10AE that comes with manual seat belts. The problem is that if I pull the belts really hard(on both the driver's and passenger belt) the belt will not lock in position. I dont think its normal and I just want to confirm this.
#2
Eet fase
iTrader: (49)
Join Date: May 2002
Location: Lexington, SC USA
Posts: 1,759
Likes: 0
Received 0 Likes
on
0 Posts
There are two types of locking systems that are employed in most cars. The clutch locking mechanism can be activated like you are trying to do, but the weight transfer system will only lock the belt when the car is involved in a crash or decelerates quickly. If the RX-7 uses the latter system, no amount of pulling or jerking on the belt will cause it to lock into place.
#4
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
good luck in a crash
they are supposed to lock when jerked.what would be the use of wearring it if it didn't work..your body will fly out the friggin windshield in a head on.....REPLACE IT AS SOON AS POSSIBLE...we care about your safety!!!junkyards should have tons of 'em.