Manifold and oil nozzle question.
#1
Newbie
Thread Starter
Join Date: Jun 2005
Location: brule Wi
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Manifold and oil nozzle question.
I was given an 88 RX7 Turbo 2 that had a fire from under the upper manifold plenum and have to replace all the vaccum lines under there. I can't seem to find a picture or anything of what or where the vacuum lines on top of the housing and manifold oil nozzle go. There was vacuum lines burnt off of them when I tore it apart but I couldn't tell where they go. I was wondering if they were just little 90 degree elbows that don't go to anything or what, can't seem to find anywhere they could go? Any ideas? Thanks
#3
Senior Member
I have some pictures that may help you, but too many and too big to post here.
If you want them, I will email them to you, but you'll need a high-speed connection. Also, let me know if you have power point, as it would save me a bunch of time to send them in that format.
If you want them, I will email them to you, but you'll need a high-speed connection. Also, let me know if you have power point, as it would save me a bunch of time to send them in that format.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM