Lug Stud
#1
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Fairfax Virginia
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Lug Stud
Does anyone have instructions on how to replace a lug stud, because being idiot i am i brook myn retorquing my wheel, any help would be greating appreciated
-Thanks
-Thanks
#2
Warheads on foreheads!
iTrader: (8)
yeah, beat the hell out of it to force it back through the hub... then insert the new one... now you SHOULD have a stud sitting where it will be. put the threads into the box end wrench, as if you stuck a pencil through a ring. now put on the lug nut, and tighten all the way down to the wrench, which the box end should separate the nut from the hub. use an impact wrench to tighten the lug until it is somewhat even with the others... by the way, the wrench should turn while using the impact wrench!
the reason for the whole wrench thing is to turn the spinning motion of the lug into a force that will pull the stud through the hole.
thanks for listening!
the reason for the whole wrench thing is to turn the spinning motion of the lug into a force that will pull the stud through the hole.
thanks for listening!
Thread
Thread Starter
Forum
Replies
Last Post