2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

looping idle problem

Old Feb 3, 2003 | 11:46 AM
  #1  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2002
Posts: 77
Likes: 0
From: riverside, ca
looping idle problem

having a looping idle problem. car idles at about 1000rpm. sometimes it will loop between 1000-1400rpms. really annoying. any ideas on what may cause this? tps is set to 1000ohms and ive tried adjusting the bac but not sure how to. turning the screw seems to have no affect on the idle. no vacuum leaks. and no air intake leaks. anything im missing? and engine isnt throwing any codes. another wierd problem im having is when i engage the clutch my idle goes up to like 1500rpms. even putting just a slight bit of pressure on the clutch makes the idle go up. i know i have a bad clutch so would that cause that?
Reply
Old Feb 3, 2003 | 11:51 AM
  #2  
1987RX7guy's Avatar
Eat Rice Don't Drive it.
Tenured Member: 20 Years
iTrader: (3)
 
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
I think the TPS is suppossed to be at 1ohm not 1000 maybe the BAC is bad already. Other than that I don't know.
Reply
Old Feb 3, 2003 | 12:07 PM
  #3  
xxxbadassfoxxxx's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 345
Likes: 0
From: franklin, MA
no bad clutch would prob not cause that but that same exact thing happend to my car but it went a step further...when i put the clutch in...it sometimes shot up to 3000rpm or even a couple time at 6500rpms!!! it scared the crapola outta me...but i reved it a little and it went back down...keep fiddling with the idle screw...and also...put some lube or grease or something on the thing in the engine that makes the car ev when you push it...it could be stuck like mine was...gerry
Reply
Old Feb 3, 2003 | 01:55 PM
  #4  
AreExSeven's Avatar
Huh?
Tenured Member 10 Years
 
Joined: Nov 2001
Posts: 1,087
Likes: 0
From: Lost
thats what my idle problem is. Up and down, up and down, over and over. It does it all the time though, not just once in a while. pisses me off.
Reply
Old Feb 3, 2003 | 02:32 PM
  #5  
xxxbadassfoxxxx's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2003
Posts: 345
Likes: 0
From: franklin, MA
it also happens to me when the car is cold...when i first start it up...it goes from like 500 to 2000 and back and forth between those and then when its a little warm its stays at about 1500 for like 5 min and then it goes down to the stock idle of 750...its a very bad sounding thing...it may be nothing...you should prob bring it to a rotary specialist and see what they have to say
Reply
Old Feb 3, 2003 | 02:39 PM
  #6  
nitroracer's Avatar
Dub'N
Tenured Member 20 Years
iTrader: (5)
 
Joined: Aug 2001
Posts: 819
Likes: 1
From: san diego
hey devius, my car does did the same thing.. i changed the tps.. and it helped a little bit. but now it does what ur talkin about very little. 500-1200 then when i push in the clutch it goes up a lil..
Reply
Old Feb 6, 2003 | 02:39 AM
  #7  
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Nov 2002
Posts: 77
Likes: 0
From: riverside, ca
anybody ever solve this problem? or know how to?
Reply
Old Feb 6, 2003 | 04:17 AM
  #8  
88 SE's Avatar
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Mar 2002
Posts: 818
Likes: 1
From: Phoenix
hehe I just wrote up a thread on how to fix common idle problems. take a look:

https://www.rx7club.com/forum/showth...hreadid=155755
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
barkz
Power FC Forum
37
Nov 21, 2020 09:34 AM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
firzen
2nd Generation Specific (1986-1992)
9
Sep 15, 2015 12:04 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
Sep 2, 2015 02:11 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:36 PM.