Logicon unit malfunction? no heat (sometimes)
#1
That's JDM tight, yo
Thread Starter
Join Date: Nov 2003
Location: Atlanta
Posts: 1,599
Likes: 0
Received 0 Likes
on
0 Posts
Logicon unit malfunction? no heat (sometimes)
I have heat, then i dont have heat, i have it, then dont....If i slap the logicon unit (heater/fan control) the heat would work....like it is not opening/closing the blend door correctly. I also have periodic blower motor problems. Sometimes it will work, then it wont. When i have the fan speed in the off position, i hear the fan relay clicking like crazy. I dont have any cooling/overheating problems. Could the logicon unit be at fault for the heat failure, as the blend door isnt working...or could it be the blend door motor? And I think the blower motor problem is that relay....any thoughts??
#2
I'm rotary for life!
Join Date: Jan 2005
Location: Ottawa
Posts: 139
Likes: 0
Received 0 Likes
on
0 Posts
Yeah would be sweet if someone could answer this cuz I have the heat, no heat issue aswell (except now I have no working blower fan cuz i plug 2 plug in the wrong ones[dont ask how] and bought new blower and still no working fan), thought it was the thermostat not working properly but I changed it to 3 different ones and still wasn't getting heat.
#4
Technician
iTrader: (1)
Join Date: Aug 2006
Location: Virginia
Posts: 1,008
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hIGGI
logicons are known to go bad.....replacing thermostats is not going to change anything, its usually electrical issue in the logicon itself....
#5
Shoulder Devil
Join Date: Jul 2006
Location: New Brunswick, NJ
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
It sounds like the cold solder points. The logicon, idiot light cluster and cpu often have issues with the solder points.
If you are going to fix it yourself, it's a real pain to get the logicon out.
If you are going to fix it yourself, it's a real pain to get the logicon out.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM