2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Locked myself out!

Thread Tools
 
Search this Thread
 
Old 12-11-06, 01:09 AM
  #1  
Junior Member
Thread Starter
 
sirsk869's Avatar
 
Join Date: Dec 2006
Location: Vancouver
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Locked myself out!

hey everyone,
So i picked up a 88 rx7 and the locks can not be unlocked from the outside with the key. The car only came with one key so im thinking either the locks are fucked, or they take a different key which was not given to me. What do you guys think?
Old 12-11-06, 01:12 AM
  #2  
Eats, Sleeps, Dreams Rotary

 
ROTARYROCKET7's Avatar
 
Join Date: Jun 2005
Location: Queens, NYC
Posts: 3,154
Likes: 0
Received 1 Like on 1 Post
Sometimes the locking mechanism in the door gets jammed. This happend to me and i had to take the door panel off from the inside, and play around with the metal rods.

Does the door open from the inside? Probaly just the key cylinder is fucked. If it doesnt open from teh inside then , the locking mechanism iss probably jammed.

Jason NYC
Old 12-11-06, 01:18 AM
  #3  
Lives on the Forum

iTrader: (7)
 
Sideways7's Avatar
 
Join Date: Dec 2003
Location: Temple, Texas (Central)
Posts: 6,596
Received 9 Likes on 5 Posts
Its possible the door locks were replaced, but not very likely. Its probably just that the cylenders are gunked up. Try using some lock cleaning stuff (blanking on what its called) on them.
Old 12-11-06, 01:24 AM
  #4  
Rotary Enthusiast

 
Phantomhp's Avatar
 
Join Date: Jul 2004
Location: Lubbock,Tx
Posts: 881
Likes: 0
Received 0 Likes on 0 Posts
The key doesn't work on the hatch lock? If so you can just unlock that and get in through the back. I am sure you have tried it just wasn't sure and throwing the idea out there.

Mike
Old 12-11-06, 02:02 AM
  #5  
Rotary Fan

 
FC Zach's Avatar
 
Join Date: Nov 2006
Location: Eagleville, TN
Posts: 159
Likes: 0
Received 0 Likes on 0 Posts
If all else fails, take a flat piece of metal with a squared end and with a very slight bend at the end and insert between the window sill and window. Aline this home made slim jim between the back of the handle and the lock and push down till you catch the rod going to the lock. If the car is equiped with the factory security system be prepared to disconnect the battery cable.
Old 12-11-06, 05:32 AM
  #6  
Winter sucks

 
micah's Avatar
 
Join Date: Jan 2004
Location: Newberg, Oregon
Posts: 3,083
Likes: 0
Received 0 Likes on 0 Posts
Call AAA... Even if you don't have an account its like 15 bucks.... they'll get your door open.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Coochas
1st Generation Specific (1979-1985)
10
10-03-15 04:49 AM
rotor_veux
2nd Generation Specific (1986-1992)
3
09-28-15 09:25 PM
ncds_fc
2nd Generation Specific (1986-1992)
19
09-15-15 12:03 AM



Quick Reply: Locked myself out!



All times are GMT -5. The time now is 12:58 AM.