2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

A little problem

Thread Tools
 
Search this Thread
 
Old Feb 9, 2005 | 07:04 PM
  #1  
Travisty's Avatar
Thread Starter
PERFCT7
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 299
Likes: 0
From: Delaware
A little problem

First let me explain that I'm posting this for a friend



So my friends rx-7 is following me downstate delaware on route 13 in wilmington (right by hooters) and he drops from my rearview. Of course first thing I'm thinking he's broke down or the 7 just cant keep up with the JEEP! (ha) But on to the problem.


It runs but only at high RPM's, wont hold idle worth ...crap . . And it sounds like at low "idle" that he's only runniing off of one rotor. Plus the added smell of unburnt fuel and a lot of smoke!

I'm thinking maybe something with the ignition system? Or maybe he blew a seal or something. I dont know, can you people give me possible common problems? He wasnt running it hard when it quit on him. Engine runs, just doesnt idle at all, cuts off when you dont give it enough in thethrottle.



Thanks,


Travis
Reply
Old Feb 9, 2005 | 07:09 PM
  #2  
RotaryEvolution's Avatar
Sharp Claws
Tenured Member 15 Years
iTrader: (30)
 
Joined: Oct 2003
Posts: 5,107
Likes: 50
From: Central Florida
check the primary injector clips, sounds like he lost an injector. could have popped a rotor but i would check the clips to be sure they are secure and not broken first then i would do a compression test. last thing to check is to be sure all coils are firing, check them with good plugs, replace the plugs if they are worn out and retest.
Reply
Old Feb 9, 2005 | 07:12 PM
  #3  
mort2002's Avatar
Rotary Enthusiast
Tenured Member 10 Years
iTrader: (1)
 
Joined: Jul 2003
Posts: 1,248
Likes: 0
From: Prosser Washington
it could possibly be a stuck injector.. i had an injector stick wide open and it sounded like the same symtoms. just an idea
Reply
Old Feb 9, 2005 | 08:01 PM
  #4  
therotaryrocket's Avatar
PIMP
Tenured Member 20 Years
 
Joined: Feb 2004
Posts: 1,012
Likes: 0
From: Greensboro, NC
its kinda easy to check for spark, start there.
Reply
Old Feb 9, 2005 | 08:46 PM
  #5  
Full Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 53
Likes: 0
From: Rolla, Mo
mine did the same thing! when it blew up! whadayano!

check compression first....easy to do and will save you the time it takes to check everything else.
Reply
Old Feb 12, 2005 | 01:10 PM
  #6  
Travisty's Avatar
Thread Starter
PERFCT7
Tenured Member 05 Years
 
Joined: Feb 2004
Posts: 299
Likes: 0
From: Delaware
Thanks everyone for your feedback, the problem rocket still isnt fixed.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WyomingTII
2nd Generation Specific (1986-1992)
12
Sep 28, 2015 10:32 AM
lnlreaper
2nd Generation Specific (1986-1992)
2
Sep 27, 2015 09:59 AM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM




All times are GMT -5. The time now is 07:32 AM.