a little pre-view VID of my new setup
#1
Laying Down Rotary Law
Thread Starter
a little pre-view VID of my new setup
Well I finnaly got her running
yesterday with the Microtech EMS
and all the fabrication
I could not really revv it
due to having a Open downpipe at the moment
I need to due the exhuast system and
get it to the dyno for some tunning
But so far idles nice and starts up with out even having to press the gas peddle
and this with a Base Map
right click "save target"
http://24.233.133.17/compressed.wmv
next is a paint job
mirror the Vid
if you quys can, if the connection gets slow
it's 1.1MB
yesterday with the Microtech EMS
and all the fabrication
I could not really revv it
due to having a Open downpipe at the moment
I need to due the exhuast system and
get it to the dyno for some tunning
But so far idles nice and starts up with out even having to press the gas peddle
and this with a Base Map
right click "save target"
http://24.233.133.17/compressed.wmv
next is a paint job
mirror the Vid
if you quys can, if the connection gets slow
it's 1.1MB
#3
Laying Down Rotary Law
Thread Starter
backup source for vid
http://f1.pg.briefcase.yahoo.com/netstarcomputers
under Vids folder
you might need to have a yahoo account
http://f1.pg.briefcase.yahoo.com/netstarcomputers
under Vids folder
you might need to have a yahoo account
Last edited by kabooski; 07-31-03 at 10:34 PM.
#5
Y00s a h000
Join Date: Jul 2003
Location: Central NJ
Posts: 1,913
Likes: 0
Received 0 Likes
on
0 Posts
Heres a good ftp that never goes down and is pretty fast that i'll host the vid on:
http://evansvillelug.org/~ocelot/hos...compressed.wmv
http://evansvillelug.org/~ocelot/hos...compressed.wmv
Trending Topics
#11
Originally posted by kabooski
Thanks for the mirror
Large street port
S5 lower LIM with upper S6 IM
NPR FMIC
Turbonetics T-66
etc
Thanks for the mirror
Large street port
S5 lower LIM with upper S6 IM
NPR FMIC
Turbonetics T-66
etc
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM