1987RX7guy

iTrader: (3)

Hey all I'm still tracking a wierd hesitation on my 87 Sport which normally happens above 4500 rpms and I found out that I am getting the "boost sensor" code through my check lamps. I looked it up in the FSM on how to test it and it has the picture of the plug for the boost sensor but it doesn't say if the pins are while looking at it unhooked or looking at it from behind while its hooked onto the boost sensor. If you all know which direction it is from let me know. BTW the procedure is on page 4A-73 of the fuel and emmissions section of the FSM. Thanks!


Santiago

NZConvertible

You must learn to think outside the square.

As per the wiring diagrams, the signal wire to the ECU is a brown wire with a red stripe.

Wankel7

All wiring diagrams in the FSM are from the back of the connector