List of Problems I Need to Fix Before College (HELP!)
08-05-03, 06:05 PM
#1
Full Member
Thread Starter
Join Date: Dec 2002
Location: Cincinnati
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
List of Problems I Need to Fix Before College (HELP!)
88 SE
1.) The BAC valve. Where is this and how to I check it to see if it's working correctly or not? How do I clean it, etc.
2.) The AFM (Air Flow Meter?). Also, where is this and how do I clean/see if it's working right, etc.
3.) I got the car in December and didn't change the plugs cause they are in there kinda tight. Im afraid to take them out with all that force risking stripping the rotar housings. Should I do it anyways?
4.) Also, if I take the belts off my Power Steiring and AC, would my car still run the same? (Without AC and P/S, duhh..)
I guess that's it. If I think of any more stuff I need to fix, I'll let you guys know.
Thank you for your time.
1.) The BAC valve. Where is this and how to I check it to see if it's working correctly or not? How do I clean it, etc.
2.) The AFM (Air Flow Meter?). Also, where is this and how do I clean/see if it's working right, etc.
3.) I got the car in December and didn't change the plugs cause they are in there kinda tight. Im afraid to take them out with all that force risking stripping the rotar housings. Should I do it anyways?
4.) Also, if I take the belts off my Power Steiring and AC, would my car still run the same? (Without AC and P/S, duhh..)
I guess that's it. If I think of any more stuff I need to fix, I'll let you guys know.
Thank you for your time.
Last edited by TheHunt; 08-05-03 at 06:22 PM.
08-05-03, 06:41 PM
#2
Eats, Sleeps, Dreams Rotary
iTrader: (1)
Join Date: Jun 2001
Location: London, Ontario, Canada
Posts: 3,106
Likes: 0
Received 0 Likes
on
0 Posts
Go to 1300cc.com for the BAC cleaning. Haynes manual for the test. I believe on the n/as it's on the driver's side of the engine, on/near the intake manifold. The AFM is right under the air intake box. Haynes to test it. If you take off the belts for AC & PS they won't work, so it will be different.
08-05-03, 07:43 PM
#5
Eats, Sleeps, Dreams Rotary
iTrader: (1)
Join Date: Jun 2001
Location: London, Ontario, Canada
Posts: 3,106
Likes: 0
Received 0 Likes
on
0 Posts
I was thinking, I'm not sure the haynes has the AFM test. You may have to look at the shop manual. You can find it on www.fc3s.org, how-to, manuals.
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-01-15 11:02 PM
