2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Lights come on, clicking, no start.

Thread Tools
 
Search this Thread
 
Old 07-27-07, 11:40 AM
  #1  
CC of L-Squared Shots

Thread Starter
 
w0ppe's Avatar
 
Join Date: Oct 2003
Location: Columbus, Ohio
Posts: 644
Likes: 0
Received 0 Likes on 0 Posts
Lights come on, clicking, no start.

Ok, on my way to the bank, stopped in to get money. I return to the car, get in, put key in try to start the car. Doesn't work. All the lights are on, my clutch is fully depressed, not in a gear, brake on. I then try letting off the clutch and doesn't work either; depress clutch and then I get an extra click noise. Try putting in gear, nothing. The lights dim a little bit when I try to start the car. Battery is new and reads 12 volts. Has one of my wires come off or something?
Old 07-27-07, 12:04 PM
  #2  
(blank)

iTrader: (1)
 
pfsantos's Avatar
 
Join Date: Nov 2005
Location: YYZ
Posts: 2,285
Received 13 Likes on 12 Posts
Jiggle the ignition switch...could be a lazy contact.

Also try jumpering the wire on the solenoid that comes from the ignition switch to see if this is the trouble. To do this, put a wire across the solenoid from the 1/4" male spade connector to the large nut where the battery power comes to. *SAFETY: make sure the car is in neutral, parking brake set or wheels choked*
Old 07-27-07, 01:21 PM
  #3  
Rotary Freak

iTrader: (1)
 
toplessFC3Sman's Avatar
 
Join Date: May 2006
Location: Ann Arbor, MI
Posts: 2,169
Likes: 0
Received 5 Likes on 5 Posts
also, make sure your battery connections are clean, this will affect it more than you think
Old 07-27-07, 02:05 PM
  #4  
CC of L-Squared Shots

Thread Starter
 
w0ppe's Avatar
 
Join Date: Oct 2003
Location: Columbus, Ohio
Posts: 644
Likes: 0
Received 0 Likes on 0 Posts
Tried jiggling the switch but that didn't really do anything. Haven't tried to jump the starter yet since it's stormy. The battery connections I just bought maybe a month ago when it did start normally. Cleaned them anyway and that didn't do much either.
My clock keep the time, resets to 1:00 every time I start, open the door, or turn on the interior lights (they don't work though).
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
The1Sun
New Member RX-7 Technical
5
09-15-15 04:45 PM
freq
Haltech Forum
5
09-13-15 07:45 AM
The1Sun
1st Generation Specific (1979-1985)
0
09-07-15 10:21 PM



Quick Reply: Lights come on, clicking, no start.



All times are GMT -5. The time now is 10:11 AM.