light switch wire harness problem
08-13-04, 01:39 AM
#1
Back at it...
Thread Starter
Join Date: Jan 2003
Location: Buffalo, NY
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
light switch wire harness problem
ok, the wire harness to my light switch keeps going on me. i have the process to get at it down to a science and can fix it (get it working again) in ~ 10 min.
anyways, i have a new switch on the way.
question is, will this fix the problem? there is a singed connection in my harness that i keep needing to clean in order to get the lights to work. it seems to work for a few days then goes out again.
anyways, do i need to find another harness? or will the new switch fix that?
icemark?
anyways, i have a new switch on the way.
question is, will this fix the problem? there is a singed connection in my harness that i keep needing to clean in order to get the lights to work. it seems to work for a few days then goes out again.
anyways, do i need to find another harness? or will the new switch fix that?
icemark?
08-13-04, 06:40 PM
#3
Former Moderator. RIP Icemark.
The harness will need to be replaced as well, if it was melted/burnt/discolored, otherwise the problem will keep happening!
Once the metal has been heated that much in the wiring and connector, it will never have a good connection after that.
Once the metal has been heated that much in the wiring and connector, it will never have a good connection after that.
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM
