Lets play guess that hose (yet again)!
#1
Huh?
Thread Starter
Join Date: Nov 2001
Location: Lost
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
Lets play guess that hose (yet again)!
But this time its a bit more difficult, as the hose is not attached to anything.
I found this hose in the bottom of the box where I threw all my engine and auxillary parts. So I'm thinking it came off of the engine and not out of anywhere in the engine bay. But that could be a mistake.
I found this hose in the bottom of the box where I threw all my engine and auxillary parts. So I'm thinking it came off of the engine and not out of anywhere in the engine bay. But that could be a mistake.
#2
Queer
Join Date: Mar 2001
Location: Formerly in the Ass end of the pacific.
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
I swear I have seen that before. I think it might be the hose to the thermowax. It doesn't really matter though if you just change out your vacuum lines anyway
#3
What R U thinking self?
Join Date: Mar 2002
Location: Stockton, CA
Posts: 2,333
Likes: 0
Received 0 Likes
on
0 Posts
That goes from the stock TID to the Metal hose that runs just above the Turbo itself. At least thats where a hose that looks EXACTLY like that goes on a S4.
Robert
There is another hose similar to that by the check valve of the upper intake .. but I think that one is a few inches longer, but hard to tell the size of that hose from the pic.
Robert
There is another hose similar to that by the check valve of the upper intake .. but I think that one is a few inches longer, but hard to tell the size of that hose from the pic.
#4
Huh?
Thread Starter
Join Date: Nov 2001
Location: Lost
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Rpeck
That goes from the stock TID to the Metal hose that runs just above the Turbo itself. At least thats where a hose that looks EXACTLY like that goes on a S4.
That goes from the stock TID to the Metal hose that runs just above the Turbo itself. At least thats where a hose that looks EXACTLY like that goes on a S4.
Thing is, it looks and feels like it's never been used. So I'm curious if it was maybe just put there by mistake.
Oh well, I'll find out if my engine doesn't run.
Oh, and heres a pic showing the size:
#7
Huh?
Thread Starter
Join Date: Nov 2001
Location: Lost
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by biorotary
that hose goes from the nipple on the middle housing next to the oil filler neck to a check valve just below the ic
that hose goes from the nipple on the middle housing next to the oil filler neck to a check valve just below the ic
Thank you
Trending Topics
#8
Huh?
Thread Starter
Join Date: Nov 2001
Location: Lost
Posts: 1,087
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by jacobcartmill
correct. i dont know where the TID came in on that one. that hose has nothing to do with the tid.
correct. i dont know where the TID came in on that one. that hose has nothing to do with the tid.
Look at this pic:
#2 and #3
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM