I have an RX7 cabrio turbo 91 model. A few days before, I noticed that when I pressed the switch for the left turn signal, sometimes (not always) the light wouldnt work (doing the fast clicking sound). Since the light worked about 90% of the times, I didnt do anything. But today the left turn light wont work at all. So here is a summary of the problem... If anyone can help, please do so.

-the left turn light signal does not work. All the 3, and not even the dashboard light. When pressed, I hear the fast clicking sound.

-the right turn light signal works fine 100% (all of them).

-the full stop (alarm) signal (all the turn lights blinking) does not work. When pressed, the right side works, the left side does NOT work, and the light at the dashboard does NOT work.

-WIERD: When the alarm pressed (anti-theft system) ALL the turn lights signal NORMAL (1 or 2 times, depenting if you are switching on the alarm, or off). ALL the blubs are working.

If anyone can help, I will be gratefull... I will also buy him a beer if he is around here, Greece Athens for the Athens 2004 Olympics!

Thanks guys

 

sounds like you need a new turn signal flasher board or it needs to be resoldered. I have flasher boards available on my website.

Fast flashes indicate a burnt bulb or bad connection.

Sounds like you alos have an aftermarket alarm added onto the car.

And I have no clue to what you are trying to say here:
full stop alarm??? what do you mean???

 

"Hazzard warning switch" is what Mazda manual says.
Where is the "turn signal flasher board" in the car? Its seems that it needs inspection.
Is it in the engine bay? Where...?

Thank you sir

 

The turn signal flasher board is in the bottom of the CPU in the drivers kick panel