Leavig off emmisions.
#1
Junior Member
Thread Starter
Join Date: Jul 2005
Location: northern New York
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Leavig off emmisions.
I am a New Yorker and my car is old enough to not need to pass emissions. I am currently putting a rebuilt S5 block into a S4 body. i was going to put all of the emissions stuff back in but i cannot find how to get the EGR from the s4 onto the s5 the hole is not the same on the top.
that aside what parts are recommended that i leave off since i don't have to worry about the emissions all together?
i was looking at the diagrams given to me by other users and i can see the EGR in the diagrams but it is never labeled for the new block...
http://www.teamfc3s.org/main/factory_service_manual/
that aside what parts are recommended that i leave off since i don't have to worry about the emissions all together?
i was looking at the diagrams given to me by other users and i can see the EGR in the diagrams but it is never labeled for the new block...
http://www.teamfc3s.org/main/factory_service_manual/
#2
Senior Member
iTrader: (1)
too be honest I run rx7 in trinidad and emmissions are not a issue...I am in ohio now and I pulled everything from my 2nd NA had no problems at all..I made block off plates for all the EGR and IAC etc with no real problems ecxept cold start up..heheh that is a bitch....but once a few min go by it warms up and runs fine
#4
Junior Member
Thread Starter
Join Date: Jul 2005
Location: northern New York
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys... i heard getting the emissions back on was a pain in the *** so i asked a few garages around my area and they all said i don't need emissions on that age car... YAY!!
Thread
Thread Starter
Forum
Replies
Last Post