Leading, trailing line up to same timing mark
#1
Newbie
Thread Starter
Join Date: Aug 2006
Location: Watertown, WI
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Leading, trailing line up to same timing mark
When I checked the timing, the leading was right on the mark, but the trailing wire also lined up with the leading mark. What's up with that? If I adjust for the trailing, then the leading will be off. Does the ECU control the leading/trailing time?
'86 non-turbo, suddenly running like crap.
'86 non-turbo, suddenly running like crap.
#2
im getting this directly from the 87 mazda rx7 n/a or turbo workshop manual.
ignition timing: 5^o ATDC for leading, and 20^o ATDC for the trailing.
if timing is off, turn the crank angle sensor to adjust.
if you want a picture of what the page says let me know and ill take a picture.
ignition timing: 5^o ATDC for leading, and 20^o ATDC for the trailing.
if timing is off, turn the crank angle sensor to adjust.
if you want a picture of what the page says let me know and ill take a picture.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM