leading coilpack wiring
05-18-08, 07:23 PM
#1
leading coilpack wiring
so i lurked around searching for the answer, got conflicting results and don't understand them.
from this thread:
https://www.rx7club.com/showthread.p...ilpacks+wiring
this image contradicts the wiring diagram.
wiring diagram:
the wires are mixed up according to the clip on the wiring diagram.
Furthermore, on the wiring diagram, the leading coilpack only has two wires label, when it clearly has three in real life.
G/Y (red?) -> to the ECU
B/Y (brown/tan?) ->to ground
mystery black wire -> ???
doesn't the leading coilpack need a +12v source?!??!!!??
basically my question is which wires go where:
tan/brown =
red =
black =
forgive me i'm not a rotary guy, i'm just using FC coilpacks on my ignition setup. Thanks for the help.
from this thread:
https://www.rx7club.com/showthread.p...ilpacks+wiring
this image contradicts the wiring diagram.
wiring diagram:
the wires are mixed up according to the clip on the wiring diagram.
Furthermore, on the wiring diagram, the leading coilpack only has two wires label, when it clearly has three in real life.
G/Y (red?) -> to the ECU
B/Y (brown/tan?) ->to ground
mystery black wire -> ???
doesn't the leading coilpack need a +12v source?!??!!!??
basically my question is which wires go where:
tan/brown =
red =
black =
forgive me i'm not a rotary guy, i'm just using FC coilpacks on my ignition setup. Thanks for the help.
05-18-08, 10:46 PM
#2
Senior Member
iTrader: (1)
Join Date: Oct 2007
Location: Nova Scotia, Canada
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
so i lurked around searching for the answer, got conflicting results and don't understand them.
from this thread:
https://www.rx7club.com/showthread.p...ilpacks+wiring
this image contradicts the wiring diagram.
wiring diagram:
the wires are mixed up according to the clip on the wiring diagram.
Furthermore, on the wiring diagram, the leading coilpack only has two wires label, when it clearly has three in real life.
G/Y (red?) -> to the ECU
B/Y (brown/tan?) ->to ground
mystery black wire -> ???
doesn't the leading coilpack need a +12v source?!??!!!??
basically my question is which wires go where:
tan/brown =That is your 12V power
red =Trigger from the ECU
black =Tach Output (not used except for testing purposes or an aftermarket tach)
forgive me i'm not a rotary guy, i'm just using FC coilpacks on my ignition setup. Thanks for the help.
from this thread:
https://www.rx7club.com/showthread.p...ilpacks+wiring
this image contradicts the wiring diagram.
wiring diagram:
the wires are mixed up according to the clip on the wiring diagram.
Furthermore, on the wiring diagram, the leading coilpack only has two wires label, when it clearly has three in real life.
G/Y (red?) -> to the ECU
B/Y (brown/tan?) ->to ground
mystery black wire -> ???
doesn't the leading coilpack need a +12v source?!??!!!??
basically my question is which wires go where:
tan/brown =That is your 12V power
red =Trigger from the ECU
black =Tach Output (not used except for testing purposes or an aftermarket tach)
forgive me i'm not a rotary guy, i'm just using FC coilpacks on my ignition setup. Thanks for the help.
Craig
Last edited by Craiger; 05-18-08 at 10:48 PM. Reason: 2nd try is better than the first
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
