knock sensor placement
#1
knock sensor placement
I'm installing an aftermarket knock sensor (stock GM one) because I threw my stock one away a while ago (because I'm dumb)...
the knock sensor looks like this: http://www.viatrack.ca/Knock/261-231-001.jpg
and the hole in the middle isn't big enough to bolt into the stock location. currently I have it bolted to where the EGR valve would be on an S4 (I have an S5 TII). Is this fine? will it still detect the knocks ok?
thanks
the knock sensor looks like this: http://www.viatrack.ca/Knock/261-231-001.jpg
and the hole in the middle isn't big enough to bolt into the stock location. currently I have it bolted to where the EGR valve would be on an S4 (I have an S5 TII). Is this fine? will it still detect the knocks ok?
thanks
#2
I just searched for a while and learned that the S4 sensor is on the center iron below the oil filler neck, it's possible that I might be able to mount it here. does anyone have a picture of where exactly it's mounted so I can see if I have that hole on my S5?
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM