2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

This is just weird

Thread Tools
 
Search this Thread
 
Old Jul 13, 2003 | 09:23 PM
  #1  
kiker14's Avatar
Thread Starter
finally back in an RX-7!!
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jun 2003
Posts: 847
Likes: 0
From: Northern New Jersey
Exclamation ::HELP!!!:: This is REALLY weird...

ok, so here's my new problem. When my car is on, and the engine is off, my sunroof and windshield wipers work just fine. However, when the engine is running, neither work at all... anybody had this happen to them? and if so, how in the world did you fix it?!?

~Andrew

btw, see sig for type of car

Last edited by kiker14; Jul 13, 2003 at 09:33 PM.
Reply
Old Jul 13, 2003 | 09:53 PM
  #2  
kiker14's Avatar
Thread Starter
finally back in an RX-7!!
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jun 2003
Posts: 847
Likes: 0
From: Northern New Jersey
somebody help me!

Please, people, respond, even if you don't know what's wrong... and tell your real smart friends to take a look at this, I really want to get my wipers to work while the engine is running...

~Andrew
Reply
Old Jul 13, 2003 | 09:55 PM
  #3  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
what does your voltage meter say while the engine is running?

and not running, but on???
Reply
Old Jul 13, 2003 | 11:19 PM
  #4  
kiker14's Avatar
Thread Starter
finally back in an RX-7!!
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jun 2003
Posts: 847
Likes: 0
From: Northern New Jersey
the voltage meter is at about 12 when the engine is running, and by "on" i mean, I turn the car on, but don't crank the engine and the stuff all works, so the car is "on" w/out the engine on
Reply
Old Jul 13, 2003 | 11:33 PM
  #5  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
It should be at least 13.5 when the engine is running. You have a bad alt or bad alt connections.
Reply
Old Jul 14, 2003 | 08:50 PM
  #6  
kiker14's Avatar
Thread Starter
finally back in an RX-7!!
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jun 2003
Posts: 847
Likes: 0
From: Northern New Jersey
I replaced the alternator belt, and did a check on the voltage... it was about 12.5 when engine was off, and almost 14 when the engine was on... so now that seems to be ok, but now that that problem seems to have gone away, I have another problem... I'm running very ragged and will stall if the throttle is opened quickly...

~Andrew
Reply
Old Jul 14, 2003 | 08:54 PM
  #7  
RX7-RICE EATER's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Apr 2002
Posts: 317
Likes: 0
From: Markham, Ontario, Canada
sounds like a wiring problem from ignition, the FSM should be able to help you. you can get it from www.iluvmyrx7.com. i had a problem from my ignitin that would not turn my fuel pump on. turned out to be bad wires from the stock wiring harness. kinda sounds like you got a similar problem.
Reply
Old Jul 14, 2003 | 09:01 PM
  #8  
kiker14's Avatar
Thread Starter
finally back in an RX-7!!
Tenured Member 15 Years
iTrader: (1)
 
Joined: Jun 2003
Posts: 847
Likes: 0
From: Northern New Jersey
ok, i'll give that a try, also, were you having problems with your secondary's fireing (or not fireing, as the case may be) cause I have had that problem since I've had the car... I'm wondering if that could be another problem you had...

~Andrew
Reply
Old Jul 14, 2003 | 10:22 PM
  #9  
STR8BALLIN - R's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Jun 2003
Posts: 634
Likes: 0
From: Toronto
fiddle with the key

I have a weird problem with my wipers that sometimes dont want to work, i find if i slightly turn the key in the ignition they fire right up
Reply
Old Jul 14, 2003 | 10:32 PM
  #10  
RX7-RICE EATER's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Apr 2002
Posts: 317
Likes: 0
From: Markham, Ontario, Canada
no the problem that i had was that the fuel pump was not getting any voltage, this is kinda strange because before this happened(same day) it seemed like my sec were not coming on or were clogged up(car was leaning out at boost), i always thought this was a sepret problem. i just used some injector cleaner and they appeared to work again.
keep in mind the wires used in rx7's suck ***! their very frail and always crack, i have had to rewire alot of things in my car.
if you know how to use a multimeter the fsm has alot of information on testing resistence on resistors and relays, which may be your problem.
i think i have become an expert on the rx7 electrical system from all the electrical problems i have had=)
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
Oct 7, 2015 08:12 PM
JoesFC
2nd Generation Specific (1986-1992)
9
Oct 5, 2015 08:10 AM
Devon Murray
New Member RX-7 Technical
1
Sep 26, 2015 08:15 AM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM




All times are GMT -5. The time now is 02:13 PM.