1SxyRXy

i am getting a pre silencer and a DP soon and was wondering if that would allow me to remove my air pump and i also wanted to do the TID mod and was wondering what would make it so i could remove those 2 lines going to the stock one. thanks

-Neil

SonicRaT

iTrader: (6)

Which two lines are you talking about? And yes, you can remove the air pump (take the ACV with it)

1SxyRXy

the 2 lines that plug into the back of the stock TID

SonicRaT

iTrader: (6)

Oh, hahaha, I thought I read TB mod, not TID mod. You can plug them up.

Fingers

One goes to the charcoal canister, the other goes to the "PCV". The PCV one will need a breather or a catchcan (you can use a cheapo fuel filter and pop it into the end of the line). The charcoal one? Fack it, just let it hang

Also, there should be a third, for the boost duty solenoid. That one should be either vented, or you can leave it if you have an aftermarket MBC

1SxyRXy

a third line? i thought there was only the stock BOV hole and the other 2 holes for the other lines