jumpered wire behind dash
jumpered wire behind dash
alright i was replacing my dash and i found a wire that has been jumpered it looks like it originally went to the plug next to it.
they are green/black,red/black wires and they are pretty thick. is this suppose to be like that or why is it jumpered?
they are green/black,red/black wires and they are pretty thick. is this suppose to be like that or why is it jumpered?
You might rework that item and put/crimp on a couple of spade connectors on each end of that wire, then reinstall the wire. From the picture it seems to be just a wire bared at each end crammed into the sockets.
Joined: Dec 2006
Posts: 2,859
Likes: 13
From: Sterling Heights, MI
Hmm, I'll have to take a look at mine, I can start it without pushing in the clutch as well. Is there anything that can fail and disable the clutch interlock system? I've glanced under my dash a few times and don't recall ever seeing any jumpered connectors or anything.
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
0
Sep 7, 2015 10:21 PM






