JSpec turbo upgrade harness help needed
#1
Newbie
Thread Starter
Join Date: Mar 2007
Location: El Paso
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
JSpec turbo upgrade harness help needed
I purchased a Jspec turbo engine for my 1986 RX7 and it came with the wire harness and computer. However, I don't know where to put the computer because it is much different than the one that was in the car with the naturally aspirated engine.
Can anyone provide some photos of the harness in location, and where the engine computer that came with the Japanese engine should be placed?
Thanks in advance
Can anyone provide some photos of the harness in location, and where the engine computer that came with the Japanese engine should be placed?
Thanks in advance
#2
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
LHD and RHD Emissions harnesses are completely different, as the ECU is on opposite sides of the car. Do yourself a favour and get a ECU and harness from a US TII. It'll make your life a lot easier.
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM