Ivegonemad's Banana Track Car Build
#1
rx7 killer
Thread Starter
Ivegonemad's Banana Track Car Build
Well its now time for my project thread (yes ive been waiting for a long time), and now im proud to actaully motivate myself to get it up and running. I planned everything and still am searching for the best possible methods of a very reliable track car. so the car will be my 88 10thAE,
yeah i got the car as is, from a friend, former rx7owner,known as rotarydelight on the forum, it came with a the 13bre engine, a custom fmic, a haltech e6x, and all the interior on the car, plus additional parts the owner didnt need...i got the car for no more than $2500.
He said all it needed was a tune, but i talked to the last shop that worked on it and they said it had low compression, 75 front 70 rear, i became sketical, and did my research...which led to this build....
so my plans are to rebuild it and do a large streetport, convert to a single turbo (i dont know which one i will be running yet), ill be running 850cc primaries, 1680cc secondaries,etc.
so today in the morning I fininshed pulling the engnine out, and took a couple pics of it...
and now i have a dirty empty engine bay..
so im taking the engine to lucky 7 where they will work on it...so far im through with today, it will be a slow build but i will get there..surely but slowly...
yeah i got the car as is, from a friend, former rx7owner,known as rotarydelight on the forum, it came with a the 13bre engine, a custom fmic, a haltech e6x, and all the interior on the car, plus additional parts the owner didnt need...i got the car for no more than $2500.
He said all it needed was a tune, but i talked to the last shop that worked on it and they said it had low compression, 75 front 70 rear, i became sketical, and did my research...which led to this build....
so my plans are to rebuild it and do a large streetport, convert to a single turbo (i dont know which one i will be running yet), ill be running 850cc primaries, 1680cc secondaries,etc.
so today in the morning I fininshed pulling the engnine out, and took a couple pics of it...
and now i have a dirty empty engine bay..
so im taking the engine to lucky 7 where they will work on it...so far im through with today, it will be a slow build but i will get there..surely but slowly...
#3
rx7 killer
Thread Starter
im still looking in to that,but i wouldnt know why they would bump me up a class its still a 2 rotor engine, yeah im plan to make 500 to the wheels...
#5
rx7 killer
Thread Starter
More Pics
so fris has sent me pics of the teardown....
as much as he told me, everything seems to be ok, just that the e-shaft has little wear, but overall it seems good, visually. next is to clean parts and inspect them, once he finishes, the rotors get new bearings and we can start the porting.
as much as he told me, everything seems to be ok, just that the e-shaft has little wear, but overall it seems good, visually. next is to clean parts and inspect them, once he finishes, the rotors get new bearings and we can start the porting.
#7
rx7 killer
Thread Starter
^ I got the car as of late january, but i did some stuff like gutting the interior, and such, but as of tuesday i have started to fully go into the build, starting with the engine. i dont think ill be completely done with the car in the next 2 years...if not sooner....
Trending Topics
#8
rx7 killer
Thread Starter
ports are getting ported...
stock exhaust port, these are so huge...god at least 3 fingers could fit.....
ehh clean ports but still need to be smoothed out...
now they are smooth ports...
stock intermediate ports
how much will be ported, it will be a large streetport...
this is as much it is right now until we can get the rest of the parts....i still have tons to do...but im busy through out the week, but monday and tuesday ill get to most of the stuff....
ehh clean ports but still need to be smoothed out...
now they are smooth ports...
stock intermediate ports
how much will be ported, it will be a large streetport...
this is as much it is right now until we can get the rest of the parts....i still have tons to do...but im busy through out the week, but monday and tuesday ill get to most of the stuff....
#17
rx7 killer
Thread Starter
well since yesterday and today i have finished painting the engine bay black, so i got a small update with pics.....
here is since yesterday...
mid day....i di clean before i painted, with my bare hands, thats autozone spary paint...lol..
i finsied the second part today...
the othere side..
well theres more to come since i got a word on the progress of the motor bieng built...so more pics on the way...
it came out better then expected....
here is since yesterday...
mid day....i di clean before i painted, with my bare hands, thats autozone spary paint...lol..
i finsied the second part today...
the othere side..
well theres more to come since i got a word on the progress of the motor bieng built...so more pics on the way...
it came out better then expected....
#18
Just curious - but what class do you plan on running in and with which sanction?
The motor looks pretty good, make sure to run a bevel on those ports so your side seals don't give way too quickly! And mask off on those yellow fenders next time you paint black, lol - i see a little overspray....
The motor looks pretty good, make sure to run a bevel on those ports so your side seals don't give way too quickly! And mask off on those yellow fenders next time you paint black, lol - i see a little overspray....
#20
rx7 killer
Thread Starter
Just curious - but what class do you plan on running in and with which sanction?
The motor looks pretty good, make sure to run a bevel on those ports so your side seals don't give way too quickly! And mask off on those yellow fenders next time you paint black, lol - i see a little overspray....
The motor looks pretty good, make sure to run a bevel on those ports so your side seals don't give way too quickly! And mask off on those yellow fenders next time you paint black, lol - i see a little overspray....
#21
rx7 killer
Thread Starter