I have an ebay intercooler kit ( the greddy copy) and the pipe that connects to the throttle body is hitting the brake master cylinder reservoir quite a lot.

I have dented the pipe a bit for clearance but it still interferes.

Has anyone use a remote reservoir kit like this :
https://www.jegs.com/i/Wilwood/950/260-7577/10002/-1

or if you have any other suggestions.

 

There's no need to change the BMC over this...literally hundreds of people (myself included) have run that crappy copy kit. Either you need a larger dent in the pipe and/or cut the "elbow" pipe on the side which attaches to the throttle body to give more clearance on the BMC.