Intake question
#3
Full Member
Thread Starter
Join Date: Apr 2003
Location: jersey
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
how can i get more air flow? besides getting the headlight cover with the opening ...can i relocate that little metal box behind the headlight on the passnger side and cut a large hole for better air flow???
#4
Former Moderator. RIP Icemark.
Originally posted by maz90rex
how can i get more air flow? besides getting the headlight cover with the opening ...can i relocate that little metal box behind the headlight on the passnger side and cut a large hole for better air flow???
how can i get more air flow? besides getting the headlight cover with the opening ...can i relocate that little metal box behind the headlight on the passnger side and cut a large hole for better air flow???
All that said, there must be a reason that steel is there. Cutting it out will probably compromise the body in the event of a collision there unless you beef up the metal surrounding the hole to compensate.
#7
Former Moderator. RIP Icemark.
I know, I had to make the stock hole behind the pass headlight bigger myself to fit my FMIC pipeing through, but I did rivet on a extra panel of 18 AWG sheet steel (with the wire and intercooler holes in it) there just in case.
Not sure how much it will help, but when I was shopping for a new FC back a couple years ago now, you would br surprised at the number of hacked up butchered up holes there were in that spot.
Not sure how much it will help, but when I was shopping for a new FC back a couple years ago now, you would br surprised at the number of hacked up butchered up holes there were in that spot.
Thread
Thread Starter
Forum
Replies
Last Post
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM