Installing Roof spoiler
Trending Topics
#8
Former Moderator. RIP Icemark.
I have 3M heavy duty automotive trim tape for installing it.
Don't forget (as per the phone call last night) you need to drill the hole for the washer nozzle. I have the drills if you need that too.
Don't forget (as per the phone call last night) you need to drill the hole for the washer nozzle. I have the drills if you need that too.
#10
Former Moderator. RIP Icemark.
As long as the surface is clean when you apply the trim tape, there will be no issue.
Both the rear spoilers on my RX-8, and on my 335i, I installed with 3M trim tape and there was no lift or loosening even at 140 mph.
Both the rear spoilers on my RX-8, and on my 335i, I installed with 3M trim tape and there was no lift or loosening even at 140 mph.
#12
Former Moderator. RIP Icemark.
#19
Rotary Freak
iTrader: (1)
also the more it heat cycles the stronger the bond gets
the Burj Al Arab hotel in Dubai has all of its exterior panels attached with 2 sided 3M tape, of a commercial grade no doubt
Last edited by niburu; 08-27-08 at 11:58 AM.