injectors question
07-23-02, 07:19 PM
#2
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
You’re a bit light on info Eddie!
What he wants to know is can you wire low impedance 460cc/min injectors in series with the low impedance 680cc/min injectors on a 1st Gen EFI engine. This is part of a turbo conversion (see his sig).
What he wants to know is can you wire low impedance 460cc/min injectors in series with the low impedance 680cc/min injectors on a 1st Gen EFI engine. This is part of a turbo conversion (see his sig).
07-23-02, 07:29 PM
#3
Senior Member
It should not be a problem to just connect the injectors together. Obviously the added injectors will fire with the same timing as the others and this might not bring the desired effect.
It will work however.
It will work however.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM