injectors not getting voltage
#1
Super Raterhater
Thread Starter
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,624
Likes: 0
Received 2 Likes
on
2 Posts
injectors not getting voltage
Ok, yet another problem on the list of many. After fixing my timing, i have now found that my injectors will not fire, theres plenty of fuel pressure, and the EGI fuse is just fine, however the primaries will not get any voltage at all during cranking. Checked the wiring, checked everything, no matter what I do it will not give voltage to the injectors. Anybody have any ideas on what I can check, or what would cause them not to recieve voltage?
#2
I'm with stupid -----^
Join Date: Mar 2001
Location: Calgary, AB, Canada
Posts: 994
Likes: 0
Received 0 Likes
on
0 Posts
EGI fuse in the fuse box next to leading coil in the engine bay... check to make sure it's not blown.. then turn on your ignition and check to make sure one of the pols is +12V and the other ground
#3
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Fuse box in the crew compartment. Near the left ankle. Counting from the bottom row, upwards, the forth row from the bottom, third fuse from the left if looking into the fuse box. That or the post above. Labled *ENGINE* on the fuse box lid.
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
Donald Hampton
2nd Generation Specific (1986-1992)
5
09-17-15 03:13 PM