2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Injectors on eBay

Thread Tools
 
Search this Thread
 
Old May 29, 2006 | 01:27 PM
  #1  
Chief_MC's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Aug 2003
Posts: 255
Likes: 0
From: Kiev, UKRAINE
Injectors on eBay

Hey guys, what do you think, will these fit '88 GTU (hi imp)? http://cgi.ebay.com/ebaymotors/ws/eB...MakeTrack=true
Looks like they should...
Reply
Old May 29, 2006 | 01:58 PM
  #2  
AlexG13B's Avatar
brap brap brap
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (7)
 
Joined: Jul 2003
Posts: 3,150
Likes: 44
From: Florida
Those are smaller than ur stock it seems. U should habe 460cc with a square connector.
Check this store, but not the size I sent u. Look for 460cc if ur stock.
Reply
Old Jun 8, 2006 | 04:50 PM
  #3  
Chief_MC's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Aug 2003
Posts: 255
Likes: 0
From: Kiev, UKRAINE
Actually they're not, i've read FSM carefully and it says 111-118 cc/15 sec, which is 444-472cc... Anyway the difference is so small, even FSM defines wider range...

What i've asked is that will they fit physically?.. I think they should, since they're EV1, but if anyone can confirm that i'd feel more relaxed when buying...
Reply
Old Jun 8, 2006 | 05:04 PM
  #4  
Project88Turbo's Avatar
Stock boost FTW!
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (22)
 
Joined: Nov 2004
Posts: 1,139
Likes: 114
From: Berlin, MD
Not sure what you are trying to do but:

1) If you wish to keep the same size injectors, but want NEW ones, consider witchhunter.com instead to have yours professionally cleaned. For $15 per injector (free return shipping 4 or more injectors) they flow/pattern the injectors, then clean/beadblast the exterior, replace the internal filter, thoroughly clean 3 times 3 ways, flow/pattern afterwards, paint the body, replace internal filter/pintle cap/o-rings/grommets, and give you a chart showing the results!! I sent mine away on a thursday, they got there monday 8am and were sent out 2pm the same day.

2) If you are looking for larger injectors to support forced induction, try this link:

http://cgi.ebay.com/ebaymotors/ws/eB...tem=8072402558

It's tlfperformance, this auction is for 550cc Venom injectors that are drop ins. By that I mean they are same dimension, offset pin, high impedence (13 ohms). These will work with no customizing needed. But keep in mind, you need tuning of some variety since the injectors are larger. These guys are great, I bought a pair of 720cc for my 88 and the match the factory ones perfectly!

Hope this helps,
Vince
Reply
Old Jun 19, 2006 | 02:28 PM
  #5  
Chief_MC's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Aug 2003
Posts: 255
Likes: 0
From: Kiev, UKRAINE
What about these: http://cgi.ebay.com/ebaymotors/4-Bos...spagenameZWDVW

I think they should fit... And they're really cheap.
Reply
Old Jun 19, 2006 | 03:25 PM
  #6  
jgrts20's Avatar
Who are you?
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 2,235
Likes: 0
From: CenCal
why do you wanna go 440cc when stock is 460cc anyway. Anything thats not specify for the rx7 is taking a chance. Some people get lucky others dont, "so think before you drink"
Reply
Old Jun 22, 2006 | 09:04 PM
  #7  
Chief_MC's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Aug 2003
Posts: 255
Likes: 0
From: Kiev, UKRAINE
Where is it specified that stock's are 460? In the FSM they say 111-118 cc/15 sec, which is 444-472cc... Maybe i am missing something... Although the difference is very subtle...
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
May 9, 2016 07:06 PM
chiefmg
1st Generation Specific (1979-1985)
2
Sep 10, 2015 07:46 AM




All times are GMT -5. The time now is 03:33 PM.