Injector Testing
#1
Full Member
Thread Starter
Join Date: Apr 2003
Location: Littleton
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Injector Testing
Im trying to test my injectors and make sure they're ok. Is there a way to do this? I pulled the UIM and cranked the car and nothing. I know I'm getting fuel because I jumped the pump and have pressure. It's a Jspec TII.
#2
Full Member
Thread Starter
Join Date: Apr 2003
Location: Littleton
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
OK, so no fuel to the injectors, just in the lines. Is the whole jspec system backwards or just on the primary rail? Should I just reroute the primary or also the primary -> secondary lines?
#3
Open up! Search Warrant!
Join Date: May 2002
Location: Kicking down doors in a neighborhood near you
Posts: 3,838
Likes: 0
Received 2 Likes
on
2 Posts
I don't know how the fuel routing is on J-spec motors, but to test the fuel injectors, you should follow the instructions in the FSM. If you don't have one, download it at www.fc3s.org
Thread
Thread Starter
Forum
Replies
Last Post
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM