2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Injector Rebuild?

Thread Tools
 
Search this Thread
 
Old Jan 9, 2013 | 05:45 PM
  #1  
Buttwete's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2010
Posts: 42
Likes: 0
From: Ozark NOT AR
Injector Rebuild?

I see many references to having injectors rebuilt but find no names of companies that rebuild injectors. Can anyone give me some names of companies that properly rebuild Mazda injectors. Mine are dribbling fuel bad
Reply
Old Jan 9, 2013 | 06:13 PM
  #2  
beefhole's Avatar
Boosted. I got BLOWN!!!
Tenured Member: 20 Years
iTrader: (29)
 
Joined: Sep 2003
Posts: 3,742
Likes: 1
From: Queens, NY
www.injectorrehab.com WitchHunter Performance - Injector Cleaning & Flow Testing Services
Reply
Old Jan 9, 2013 | 06:51 PM
  #3  
MIDNFauciUSN's Avatar
Roll FIS green
iTrader: (8)
 
Joined: Mar 2003
Posts: 1,738
Likes: 14
From: Jax, FL
rceng.com too
Reply
Old Jan 9, 2013 | 07:08 PM
  #4  
Jackintheb0x214's Avatar
Full Member
iTrader: (1)
 
Joined: Jul 2012
Posts: 155
Likes: 0
From: Kansas
Have you tried findin someone local that will do it? We have a suzuki cycle dealership that does injectors but thats probably only that one in particular...have you tried searching online yet?
Reply
Old Jan 9, 2013 | 07:22 PM
  #5  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
they don't rebuild them,they clean them.
Reply
Old Jan 9, 2013 | 08:05 PM
  #6  
beefhole's Avatar
Boosted. I got BLOWN!!!
Tenured Member: 20 Years
iTrader: (29)
 
Joined: Sep 2003
Posts: 3,742
Likes: 1
From: Queens, NY
^correct, technically I don't think they can even be "rebuilt" right?
sorry, link was bad, should be:
Injector-Rehab Fuel Injector Cleaning Services
Reply
Old Jan 9, 2013 | 08:22 PM
  #7  
clokker's Avatar
Cake or Death?
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jan 2007
Posts: 10,249
Likes: 64
From: Mile High
Originally Posted by beefhole
technically I don't think they can even be "rebuilt" right?
Right.

If they could be, you know damn well someone would be porting them.
Reply
Old Jan 10, 2013 | 05:40 PM
  #8  
Jackintheb0x214's Avatar
Full Member
iTrader: (1)
 
Joined: Jul 2012
Posts: 155
Likes: 0
From: Kansas
Originally Posted by misterstyx69
they don't rebuild them,they clean them.
Ive only had mine cleaned by them. But how does he know that he needs them rebuilt?
Reply
Old Jan 10, 2013 | 11:34 PM
  #9  
Evil Aviator's Avatar
Rotorhead
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 9,136
Likes: 39
From: Charlottesville, Virginia, USA
Originally Posted by misterstyx69
they don't rebuild them,they clean them.
Yes, but they may also install new o-rings, grommets, filters and pintle caps, depending on the service.

Originally Posted by clokker
If they could be, you know damn well someone would be porting them.
WitchHunter Performance - Subaru Fuel Injector Modifications

Originally Posted by Jackintheb0x214
But how does he know that he needs them rebuilt?
"Rebuilding" is slang for cleaning.
Reply
Old Jan 11, 2013 | 12:29 AM
  #10  
RotaryResurrection's Avatar
Lives on the Forum
Tenured Member: 20 Years
Liked
iTrader: (8)
 
Joined: Oct 2003
Posts: 11,576
Likes: 27
From: Morristown, TN (east of Knoxville)
I use Jon at Fuel Injector Connection in atlanta. He's a heck of a nice guy and since I am just a few hours away I usually get them back within a week of sending them out.
Reply
Old Jan 11, 2013 | 12:38 AM
  #11  
Silverfc88's Avatar
Rotary Freak
Tenured Member 15 Years
iTrader: (7)
 
Joined: Nov 2002
Posts: 1,790
Likes: 3
From: Travis AFB, CA to Okinawa, Japan
All shops mentioned will get the job done.
Reply
Old Jan 11, 2013 | 01:14 AM
  #12  
tom0261's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jun 2005
Posts: 76
Likes: 0
From: SoCal
Used WitchHunter recently. Mailed them off, they turned them around in one day, had them back in less than a week with a neat printout of their performance before and after.
Reply
Old Jan 17, 2013 | 08:39 AM
  #13  
Buttwete's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2010
Posts: 42
Likes: 0
From: Ozark NOT AR
Thanks for the info. Will ck these out as I have ck'd everything else out and injectors are all thats left
Reply
Old Jan 17, 2013 | 09:21 AM
  #14  
DC5Daniel's Avatar
Rotary Freak
Tenured Member 10 Years
iTrader: (10)
 
Joined: Jul 2012
Posts: 1,631
Likes: 89
From: Peachtree City, GA
Advanced Injector is who I used. They were formerly known as WitchHunter Central, personally trained and operated under the wing of WitchHunter. It's in Kansas so more central and prices have been lowered now that he's on his own.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
Sep 9, 2015 05:24 PM
SCinfidel
3rd Generation Specific (1993-2002)
4
Sep 8, 2015 05:36 PM




All times are GMT -5. The time now is 12:45 AM.